If you are not able to connect to Airtame through your local WiFi, you have the option of restoring the two WiFi access points of AIRTAME. This will disconnect and forget your current connection to your router and use both the 2.4GHz and 5GHz antennas to broadcast access to Airtame.
To do this:
- Power up Airtame and wait for it to boot
- Hold down the LED light button for 3 seconds* and then release immediately. You will see the LED flash quicker.
- Wait for Airtame to react and reboot.
*It is important to release the button while the LED is still flashing or else the command will not be detected.