If the regular setup wizard is not working for you or you would like a quicker way of setting up many devices, try this method for naming and connecting your new device to WiFi.
This method can be used for any platform including Mobile devices like iOS and Android.
Download the latest version of the app from https://airtame.com/download
Connect your computer or mobile device to Airtame's WiFi. These are displayed on the splash screen when Airtame is plugged into a display.
Open an internet browser and type in 192.168.22.1 This is the default IP address when connected directly to Airtame.
Type in a personal name you would like Airtame to have, find your network in the WiFi list and fill in a password. Finish up by clicking on "Apply New Settings".
If you would like to do further configurations, you can do so through your local network so long as Airtame was successful connecting to it. To do this, type in the new IP address shown on the TV splash screen below your device's name.
Alternatively, you can also do changes by connecting directly to your device's network which should now be named the same as your device and again using the IP 192.168.22.1
Now you can check to make sure your device's Firmware is fully updated